Special Order Only
| Article number: | 2565 |
Use this lid along with the BrewZilla or DigiBoil and a copper still top to make your own easy-to-use distillery.
The lid gasket has two distinct sides, one that is rounded and one that is completely flat. When installing the gasket the flat side should be facing up. Use one hand to stretch the gasket around the lid and the other to push the gasket into the channel.
This lid has a 1.85" (47mm) hole for the still top. Lid gasket included.
Note: This lid uses a 6mm gasket to better fit the Gen 4 BrewZilla and Gen 2 DigiBoil. It is also backwards compatible with Gen 3 and older BrewZillas and Gen 1 DigiBoils. To improve the seal further, we highly recommend using the Adjustable Lid Clamps with the Distillation Lid if your unit does not have them.
KegLand Part Number: KL10962
